Did you know that Comet exists in a US version as well?
English Česky Africa China Español Français Magyar Polski Sweden USA

M1300多功能数据记录仪 - 4路通用型输入通道





  • 型号
  • 3 年



工作温度范围 -10 to +60°C
湿度测量范围 5% to 85%RH,无补偿
湿度传感器温度补偿范围 温度量程范围内均可
测量间隔 1s至24小时
可用温度单位 摄氏度, 华氏度
计算值 露点温度、绝对湿度、比湿度、混合率、比焓
存储容量(approx.) 1 000 000记录值(非循环记录), 600 000记录值(循环记录)
IP防护等级 IP20
通信接口 Ethernet, USB, RS232
报警协议 E-Mail
配置 Comet Vision, WWW配置
电源 AC适配器230Vac/5Vdc (以太网接口需要)
电池 NiMH 3节可循环充电1.2V AA电池 (备份或便携式应用)或3节1.5V AA碱性电池 (便携式应用)
电源接口 同轴线缆, 直径5.5 x 2.1mm
尺寸 178 x 95 x 37mm (W x H x D),无连接线缆



Aplikace - Zdravotnictví a laboratoře

Healtcare and laboratories - Monitoring of storage areas at temperatures up to -200 °C.

Aplikace - Sklady

Food industry - Monitoring of critical processes according to the HACCP standard with the possibility of prompt notification of unforeseen events that could lead to the degradation of the goods.

Aplikace - Průmysl

Industry and production - monitoring temperature and humidity in food, pharmaceutical, aerospace etc.

Aplikace - Sklady

Production facilities and warehouses - Monitoring of storage conditions and production processes in the temperature range -200 ° C to + 600 ° C. Sending data to COMET Database or SCADA third-party systems.

Aplikace - Serverovny a datová centra

Metrology - COMET sensors together with COMET radiationshields are the ideal basis for weather stations for long-term weather, climate and air monitoring.

Aplikace - Serverovny a datová centra

Data centers, server rooms - Temperature and humidity monitoring, data center monitoring, RACK stands, including flood status reports, opening / closing of doors (windows), motion, smoke. SNMP monitoring, remote alarms by email and Syslog.

Aplikace - Automatizace budov a HVAC

Building management - Our instruments which measure temperature, humidity, atmospheric pressure and CO2 are an integral part of these industry-leading solutions.

Features description:

● the features may vary depending on the device type
● up to 6 hardware inputs for measuring and recording, 16 virtual channels for temperature, humidity, dew point, atmospheric pressure, current 0 - 20 mA and voltage 0 - 10 V (-60 to 140 mV), two-state events, pulses, CO2
● memory for 1 million values
● indication of alarm conditions via e-mail, SMS, integrated acoustic siren LEDs, stwo-state output to control other devices
● analytical software for data processing and configuration - COMET Vision
● communication interfaces - USB, RS232 and Ethernet (SNMPv1 and XML)


Warranty 3 years Traceable calibration certificate COMET Database Data report Datalogger Handheld device Two-state inputs 2 line LCD Internal memory Ethernet
AlarmBattery powerRecheargeable batteryIP protection

Up to 4 physical Inputs - TERMINALS

Multilogger M1300 inputs
Removable terminal blocks allows connection of:
  • Sensors with voltage output (range 0-10 V; accuracy ±10 mV)
  • Sensors with current output (range 0-20 mA; accuracy ±20 µA)
  • Sevices with two-state output (potential-less contact or voltage signal 0-30V); may be applied to input 3 and 4
  • Devices with pulse signal (potential-less contact or voltage signal 0-30V); may be applied to input 4

Evaluation of up to 16 variables

Multilogger - LCD detail
Up to 16 variables may be calculated from the four connected probes / sensors. This is the sum of the measured and calculated values. The calculated values can be a further expression of moisture – dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy. It can be also the result of inter-channel conversions, e.g. the difference of two connected temperature probes.Multilogger LCD display detail.

The measured values are stored in the internal non-volatile memory. Memory capacity is up to 1 million values. Logging mode can be adjusted as non-cyclic, when logging stops after filling the memory, or cyclic, when after fulfilling the memory oldest stored values are overwritten by new ones.

Measured values are displayed on the screen with backlight option and the ability to change the size of display digits

Power supply

Multilogger - Power Supply
Multilogger - Power Supply

Multilogger can be powered by AC adapter or by rechargeable batteries with charging capability. Batteries are always a part of the device (you can also use standard alkaline AA batteries). Batteries power the device for several months.

While using the AC adapter, the batteries provide backup operations and provide recording and measurement during power failure. Thanks to the Ethernet output the device informs about the failure via e-mail message.

Alarm limits and alarm indication

Multilogger - Alarm limits

It is possible to set two independent alarm limits for each channel (i.e. measured or calculated value).

Alarm signalization can be acoustic (built-in beeper), optical, sending an e-mail alert or an alarm output. The alarm output is for connecting an external audio or visual alarm.

Communication interfaces

Multilogger - Alarm limits

Multilogger is always equipped with USB connector for communication, data analysis and also for charging of the rechargeable batteries.

Included Ethernet interface allows to:

  • send an e-mail when an alarm state starts or ends
  • use DATALINK: display current values or download values from memory to COMET Database in your PC. Software COMET Database contains many useful tools for data analysis - graphs, tables, statistics, etc.
  • simple wireless communication with Wi-Fi TP-LINK router
  • third-party applications to read the actual measured values using universal protocols SNMPv1 and XML
  • view current measured values using your web browser


Multilogger - Alarm limits and alarm indication
  • Output can be used for controling other devices when alarm is launched, such as external buzzer, telephone dialer etc.
  • Type of output - open collector transistor
  • Max. switching current - 100 mA
  • Max. voltage on output - 24 V
  • Auxiliary voltage at terminal - +5 V (only when the mains supply is present)
  • Users can receive alarms if the values go outside the paramters set. Alarms are indicated through an internal buzzer , 3 LEDs or email alerts via Ethernet port.


AC/DC电源适配器,100-240 Vac转5Vdc/2.1A

AC/DC电源适配器,100-240 Vac转5Vdc/2.1A

型号 A1825eu
AC/DC电源适配器,100-240 Vac转5Vdc/2.1A - kopie

AC/DC电源适配器,100-240 Vac转5Vdc/2.1A - kopie

型号 A1825uk
AC/DC电源适配器,100-240 Vac转5Vdc/2.1A - kopie

AC/DC电源适配器,100-240 Vac转5Vdc/2.1A - kopie

型号 A1825us



型号 BM511


型号 MLP006


型号 MP026



型号 CDB
COMET Vision - 数据记录仪和M系列多功能数据记录仪软件

COMET Vision - 数据记录仪和M系列多功能数据记录仪软件

型号 CV


型号 DBV



型号 MLP002


型号 MLP003


型号 SP009

300Mbps Wireless N Nano 路由器

300Mbps Wireless N Nano 路由器



download-icon Comet Vision Software (2.3.8668.26118 dbapi 21.0)
15.69 MB
download-icon Comet Database One Click Installer (21.0-I)
487.05 MB
download-icon Database Viewer dbapi 21.0
24.23 MB


download-icon Terms and Conditions COMET System s.r.o.
133.12 KB


download-icon Instruction Manual
2.24 MB
download-icon Instruction Manual - the connection of detectors to the Multilogger M13xx
428.37 KB
download-icon Quick Start Manual
1,009.40 KB
download-icon Declaration of Conformity
58.20 KB
download-icon MIB
575.32 KB


download-icon CATALOG - Multilogger
1.24 MB


M1140多功能数据记录仪 - 温湿度计,4路MiniDIN输入通道

M1140多功能数据记录仪 - 温湿度计,4路MiniDIN输入通道

型号 M1140
M1200多功能数据记录仪 - 温度计,4路热电偶输入通道

M1200多功能数据记录仪 - 温度计,4路热电偶输入通道

型号 M1200
M1220多功能数据记录仪 - 温湿度计,2路MiniDIN输入与2路热电偶输入通道

M1220多功能数据记录仪 - 温湿度计,2路MiniDIN输入与2路热电偶输入通道

型号 M1220
M1320多功能数据记录仪 - 温湿度计,2路MiniDIN输入与2路通用输入通道

M1320多功能数据记录仪 - 温湿度计,2路MiniDIN输入与2路通用输入通道

型号 M1320
M1321多功能数据记录仪 - 温湿度、气压计,2路MiniDIN输入与2路通用输入通道

M1321多功能数据记录仪 - 温湿度、气压计,2路MiniDIN输入与2路通用输入通道

型号 M1321
M1322多功能数据记录仪 - 温湿度、CO2浓度计,2路MiniDIN输入与2路通用输入通道

M1322多功能数据记录仪 - 温湿度、CO2浓度计,2路MiniDIN输入与2路通用输入通道

型号 M1322
M1323多功能数据记录仪 - 温湿度、CO2、气压计,2路MiniDIN输入与2路通用输入通道

M1323多功能数据记录仪 - 温湿度、CO2、气压计,2路MiniDIN输入与2路通用输入通道

型号 M1323
M1300多功能数据记录仪 - 4路通用型输入通道

M1300多功能数据记录仪 - 4路通用型输入通道

型号 M1300
M1440多功能数据记录仪 - 温湿度、CO2浓度计,4路MiniDIN输入通道

M1440多功能数据记录仪 - 温湿度、CO2浓度计,4路MiniDIN输入通道

型号 M1440

Multilogger Demo